Clarion CZ703E Owner's Manual download pdf (Page 14)

English

CZ703E

Bluetooth Operations

Track-down

1. Press the [ ] button to move to the

beginning of the previous track.

2. Each time the [ ] button is pressed,

playback proceeds to previous track in the

reverse direction.

Note:

Playing order will depend on Bluetooth

audio

player. When [ ] button is pressed, some

A2DP devices will restart the current track

depends on the duration of playback.

During music streaming playback, “A2DP

and HFP” will be shown on the display. When

A2DP device is disconnected,

“BLUETOOTH DISCONNECT” will be shown

on the display and return to previously

selected audio source. Some Bluetooth

audio players may not have play / pause

synchronized with this unit. Please make sure

both device and main unit are in the same

play / pause status in BT MUSIC mode.

ID3 display

During music streaming playback, for music

information that is longer than the display

panel:

When SCROLL is ON, the LCD will display

ID3 TAG information cyclely, e.g: ALBUM-

>TITLE->ARTIST>...

When SCROLL is OFF, the LCD will display

one of the ID3 TAG information, the default

is TRACK, but user can adjust it to other ID3

TAG information by press [ DISP ] button.

6. TROUBLE SHOOTING

Press [SRC / ] button on the panel to select

“AUX”.

AUX is just for audio content with 3.5mm Jack

connector plugged into audio-in socket on the

front panel.

AUX Input sensitivity setting

1. Press and hold the [DISP] button (1 sec.).

2. Turn the [VOLUME] knob to select “AUX

SENS”.

3. If the output level of connected external

audio player is “HIGH”, rotate [VOLUME]

knob and choose “LOW”. And if the output

level is “LOW”, choose “HIGH”.

AUX Operations

GENERAL

Problem Cause Measure

Unit can not

power on.

Unit fuse blown. Replace with new fuse of correct rating.

Car battery fuse blown. Replace with new fuse of correct rating.

Unit can not

power on.

Nothing happens

when buttons are

pressed.

Display is not

accurate.

The microprocessor has

malfunctioned due to noise, etc.



Press the [RESET] button with a thin rod.



When the [RESET] 



RESET





No/low audio

output.

Improper audio output connection. Check wiring and correct.

Volume set too low. Increase volume level.

Speakers damaged. Replace speakers.

Heavily biased volume balance. Adjust the channel balance to center position.

Speaker wiring is in contact with

metal part of car.

Insulate all speaker wiring connections.

Poor sound quality

or distortion.

Non-standard disc used. Use a standard disc.

Speaker power rating does not

match unit.

Replace speakers.

Wrong connections. Check wiring and correct.

Speaker is shorted. Check wiring and correct.

Tel-Mute

malfunction

MUTE wire is grounded. Check the MUTE wiring and correct.

Unit resets itself

when engine is off.

Incorrect connection between ACC

and Battery.

Check wiring and correct.

DISC Player

Problem Cause Measure

Disc cannot be

loaded.

Another disc is already loaded. Eject the disc before loading the new one.

There is an object installed inside the

unit.

Remove the object inside the unit.

Sound skips or is

noisy.

Compact disc is dirty. Clean the compact disc with a soft cloth.

Compact disc is heavily scratched or

warped.

Replace with a compact disc with no

scratches.

Sound is bad when

power is rst turned

on.

Condensation may form on the internal

lens when the car is parked in a humid

place.

Let dry for about 1 hour with power on.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Clarion CZ703E Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Car media receivers Clarion CZ703E