Clarion DFZ667MC User Manual download pdf (Page 25)

Common Operations

25

DFZ667MC

English

Setting for scroll speed

You can adjust scroll speed between SPEED 1

(maximum) and SPEED 6 (minimum).

* The factory default setting is “SPEED 2”.

1. Press and hold the [D] button for 1second or

longer to switch to the adjust mode.

2. Press the [R] or [F] button to select

“SCRL SPEED”.

3. Turn the [ROTARY] knob and select scroll

speed.

4. Press the [D] button to return to the previous

mode.

Dimmer control

You can setting the dimmer control ON or OFF.

* The factory default setting is “ON”.

1. Press and hold the [D] button for 1 second or

longer to switch to the adjust mode.

2. Press the [R] or [F] button to select

“DIMMER”.

3. Turn the [ROTARY] knob and select

“DIMMER ON” or “DIMMER OFF”.

4. Press the [D] button to return to the previous

mode.

Adjusting the display contrast

You can adjust the display contrast to match the

angle of installation of the unit.

* The factory default setting is “5”.

(Adjustment range: 1 to 16)

1. Press and hold the [D] button for 1 second or

longer to switch to the adjust mode.

2. Press the [R] or [F] button to select

“CONTRAST”.

3. Turn the [ROTARY] knob to adjust the

contrast.

4. Press the [D] button to return to the previous

mode.

Adjust Mode

Remaining capacity of the memory

The remaining capacity of the flash memory can

be displayed as an approximate recordable time

in “MM : SS” (minute : second).

1. Press the [A] button to switch to the adjust

mode.

2. Press the [R] or [F] button to select “MC

AVIL ”.

3. Press the [h] button.

4. Press the [A] button to return to the previous

mode.

Setting a recording mode

The recording mode for MUSIC CATCHER II can

be switched between the following 4 modes:

•“SHQ” :about 248 minutes

•“HQ” :about 331 minutes

•“STD” :about 497 minutes

•“LP” :about 663 minutes

* The factory default setting is “STD”.

1. Press the [A] button to switch to the adjust

mode.

2. Press the [R] or [F] button to select “MC-

REC”.

3. Turn the [ROTARY] knob and select “SHQ”,

“HQ”, “STD” or “LP”.

4. Press the [A] button to return to the previous

mode.

Anti-theft indicator

When the ignition key is turned to Off, Red Anti-

theft indicator blinks to prevent theft by its

luminous effect.

* The factory default setting is “OFF”.

1. Press the [A] button to switch to the adjust

mode.

2. Press the [R] or [F] button to select

“BLINK LED”.

3. Turn the [ROTARY] knob and select “LED

ON” or “LED OFF”.

4. Press the [A] button to return to the previous

mode.

DFZ667MC.book Page 25 Wednesday, June 14, 2006 4:39 PM

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 36 37

Comments to this Manuals

No comments