Clarion M502 Owner's Manual download pdf (Page 14)

English

M502

Bluetooth Operations

Note:

Playing order will depend on Bluetooth

audio

player. When press the [CONTROL] knob(left)

or [

] button on the remote control is

pressed, some A2DP devices will restart

the current track depends on the duration of

playback.

During music streaming playback, “A2DP” will

be shown on the display. Information about

tracks (e.g. the elapsed playtime, song

title, etc.) cannot be displayed on this

unit. When A2DP device is disconnected,

“BLUETOOTH DISCONNECT” will be shown

on the display

and return to previously selected audio

source. Some Bluetooth

audio players may

not have play / pause synchronized with this

unit. Please make sure both device and main

unit are in the same play / pause status in BT

MUSIC mode.

ID3 display

During music streaming playback, for music

information that is longer than the display

panel:

When SCROLL is ON, the LCD will display ID3

TAG information cyclely, e.g:

ALBUM->TITLE->ARTIST..

When SCROLL is OFF, the LCD will display

one of the ID3 TAG information, the default

is TRACK, but user can adjust it to other ID3

TAG information by press the [DISP] button on

the remote control.

5. TROUBLE SHOOTING

Problem Cause Measure

Unit can not

power on.

Unit fuse blown. Replace with new fuse of correct rating.

Car battery fuse blown. Replace with new fuse of correct rating.

Unit can not

power on.

Nothing happens

when buttons are

pressed.

Display is not

accurate.

The microprocessor has

malfunctioned due to noise, etc.



Press the [RESET] button with a thin rod.

Note:

When the [RESET] 

the ACC power.*

* When the [RESET] button is pressed,preset

radio stations, titles, etc. stored in memory

are kept.

No/low audio

output.

Improper audio output connection. Check wiring and correct.

Volume set too low. Increase volume level.

Speakers damaged. Replace speakers.

Heavily biased volume balance. Adjust the channel balance to center position.

Speaker wiring is in contact with

metal part of car.

Insulate all speaker wiring connections.

Poor sound quality

or distortion.

Speaker power rating does not

match unit.

Replace speakers.

Wrong connections. Check wiring and correct.

Speaker is shorted. Check wiring and correct.

Unit resets itself



Incorrect connection between

ACC and Battery.

Check wiring and correct.

USB Devices

Problem Cause Measure

USB device cannot

be inserted.

The USB device has been

inserted with wrong direction.

Reversing the connection direction of the USB

device, try it again.

The USB connector is broken. Replace with a new USB device.

USB device is not

recognized.

The USB device is damaged. Disconnect the USB device and reconnect. If

the device is still not recognized, try replacing

with a different USB device.

Connectors are loose.

No sound heard

with the display “No

File” shown.

No MP3/WMA le is stored in

the USB device.

Store these les properly in the USB device.

Sound skips or is

noisy.

MP3/WMA les are not encoded

properly.

Use MP3/WMA les encoded properly.

GENERAL

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 54 55

Comments to this Manuals

No comments

Clarion M502 Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Car media receivers Clarion M502