Clarion VRX785BT User Manual download pdf (Page 78)

VRX785BT

English

INSTALLATION

MANUAL

7. REMOVING THE MAIN UNIT

1. When the rear of the main unit has been

secured with the method shown in Figure 6

unfasten the special screw.

2. Remove the outer escutcheon.

3. Insert the hook plate between the spring and

the universal mounting bracket, fit tab B of

the spring into hole A of the hook plate, then

pull the main unit out by the hook plate. (Insert

both the right and left edges of the hook

plate.) (Figure 9)

Note:

• Keep the hook plate. You cannot remove the main

unit without disengaging the hook plate.

8. CAUTIONS ON WIRING

1. Be sure to turn the power off before wiring.

2. Be particularly careful where you route the

wires.

Keep them well away from the engine, and

exhaust pipe, etc. Heat may damage the

wires.

3. If the fuse should blow, check to see if the

wiring is correct.

If a fuse is blown, replace it with a new one of

the same amperage rating as the original

(15A FUSE).

4. To replace the fuse, remove the old fuse of

the power supply cord and insert the new one.

(Figure10)

Note:

• There are various types of fuse holder. Do not let

the battery side touch other metal parts.

CAUTION

caution

After the connection, fix the cord by a clamp

or insulation tape for protection.

Universal mounting bracket

Figure 9

Main

Unit

Instrument panel

Spring

2-Hook plate

Outer escutcheon

Fuse (15A FUSE)

Figure 10

Fuse holder

280QC6827BA-VRX785BT_EN.book Page 76 Wednesday, January 23, 2008 10:57 PM

1 2 ... 73 74 75 76 77 78 79 80 81 82 83

Comments to this Manuals

No comments

Clarion VRX785BT User Manual Page 78

Comments to this Manuals

Related products and manuals for Car media receivers Clarion VRX785BT