Clarion DXZ768RMP User Manual download pdf (Page 26)

26 DXZ768RMP

280-8334-00

English

Operations Common to Each Mode

● Cellular phone interrupt setting

If you connect this unit and your cellular phone

with a separately sold cable, you can listen to

your telephone calls on your car speakers.

∗ The factory default setting is “OFF”.

2-1. Select “ TEL-SWITCH”.

3-1. Turn the [ROTARY] knob to select the

setting. Each time you turn the [ROTARY]

knob, the setting changes in the following

order:

“OFF” ➜ “ON” ➜ “MUTE” ➜ “OFF”...

• OFF:

This unit continues normal operation even

when the cellular phone is used.

Note:

• If connecting a hands-free kit, please ensure the

setting is ON to receive the telephone audio

through the system.

• ON:

You can listen to your telephone calls from

the speakers connected to this unit.

∗ When listening to your calls on your car

speakers, you can adjust the volume by

turning the [ROTARY] knob.

• MUTE:

The sound from this unit is muted during

telephone calls.

● Setting the auto-volume function

(CALIBRATE/A-VOL SENS)

You can automatically change the volume to

match your car's speed.

∗ The factory default setting is “LOW”.

2-1. Select “ CALIBRATE”.

2-2. Press the [ ] button.

2-3. Accelerate to a speed of 50 km.

2-4. When you reach 50 km, press [ ] button.

Calibration is executed.

• When calibration succeeded

After 2 seconds or longer, “SUCCESSFUL”

will appear on the display.

• When calibration failed

After 2 seconds or longer, “FAILED” will

appear on the display. Repeat the

procedure from step 2-3.

2-5. Next, adjust the sensitivity. Press the [å,

∂] lever upward or downward to select

“ A-VOL SENS”.

3-1. Turn the [ROTARY] knob to select the

sensitivity.

● Setting the external amplifier

∗ The factory default setting is “OFF”.

2-1. Select “ AMP CANCEL”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

• ON:

Use with connected AMP.

• OFF:

Use with inside AMP.

● Selecting AUX/TEL

You can listen to sounds and music from

external devices or your telephone calls from

the speakers when connected to this unit.

When TEL INT or External device is connected to

this unit, you can select TEL mode or AUX mode.

∗ The factory default setting is “AUX”.

2-1. Select “ AUX/TEL”.

3-1. Turn the [ROTARY] knob to select “AUX” or

“TEL”.

• AUX :

AUX/TEL input cable is for external Audio

input.

• TEL :

AUX/TEL input cable is for cellular phone

audio input.

● Adjusting the auxiliary input

sensitivity

Adjust the auxiliary sensitivity when the audio

from an external device is difficult to hear even

after adjusting the volume.

∗ The factory default setting is “MID”.

2-1. Select “ AUX SENS”.

3-1. Turn the [ROTARY] knob to select from

“LOW”, “MID” or “HIGH”.

● Setting the car speaker output for the

cellular phone

∗ The factory default setting is “RIGHT”.

∗ To output the telephone calls, set the cellular

phone interrupt to ON.

2-1. Select “ TEL SPEAKER”.

3-1. Turn the [ROTARY] knob to select “RIGHT”

or “LEFT”.

• RIGHT:

Telephone calls can be heard on the front

right speaker connected to this unit.

• LEFT:

Telephone calls can be heard on the front

left speaker connected to this unit.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Comments to this Manuals

No comments