Clarion VRX633R Owner's Manual download pdf (Page 34)

38 VRX633R

English

Owner’s manual

Dynamic Label Function

A dynamic label (hereinafter referred to as “DLS”)

is a text data associated with each DAB service.

This set can display DLS up to 128 characters in

a display.

∗ This function is enabled only when the panel is

open.

DLS display mode

Press the TITLE button ¢ for 1 second or longer

to place in the DLS display mode. To cancel the

DLS mode and return to the previous display,

press the TITLE button ¢ again. If there is a DLS

data in the reception service, DLS text is dis-

played in the text displaying area.

A mark “

Î” appears at the head of a whole text

sentence (page), and a RETURN mark is indi-

cated at the end point.

DLS memory

Up to six DLS, currently being received, can be

stored. By pressing the PRESET button # 1 to

6 for 2 seconds or longer, the DLS page currently

being displayed is stored. Operating the JOY-

STICK § rightward or leftward moves a cursor

to either P1 through P6, and pressing the ENT

at the center of the JOYSTICK § for 2 seconds

stores it.

DLS Calling

To call the DLS stored in the DLS memory, press

the PRESET button #. The DLS in the DLS

memory is displayed by 16 characters (2 lines)

at the intervals of 5 seconds (automatic calling).

To display at shorter intervals, press the PRE-

SET button # while waiting for successive DLS

character string to be displayed, the following

DLS character string is displayed (manual call-

ing).

With the DLS memory being called, move the cur-

sor to “UPDATE” and press the ENT at the cen-

ter of the JOYSTICK §. The display is changed

into the DLS display being received.

Digital Radio/DAB Operations

3. When “PTY ITEM” is selected, PTY selection

is carried out. Operate the JOYSTICK § up-

ward or downward to select a desired PTY.

Press the ENT at the center of the JOYSTICK

§ to set the selected PTY ITEM.

(The PTY ITEM thus set is listed at the lower

right of the display.)

4. When “PRESET” is selected, PTY preset

memory can be called for and stored.

5. Operate the JOYSTICK § upward or down-

ward to select Preset Nos.1 to 6.

6. Press the ENT at the center of the JOYSTICK

§ to call for the preset PTY ITEM.

Press the ENT at the center of the JOYSTICK

§ for 2 seconds to store the PTY ITEM cur-

rently selected to any Preset No. selected

(listed at the lower right).

7. After adjustment is finished, operate the JOY-

STICK § rightward or leftward to move the

cursor to “MENU”, and press the ENT at the

center of the JOYSTICK § to return to STAN-

DARD display.

Emergency broadcast

If an emergency broadcast is received, all the

function mode operations are stopped. “ALARM”

appears in the display and the emergency broad-

cast can be heard.

∗ RDS interrupt does not function during AM radio

reception or in TV mode.

● Cancelling an emergency broadcast

If you press the AF Button 7, emergency broad-

cast reception is cancelled.

Volume setting of TA, emergency

broadcast (ALARM), information

and PTY

The volume for TA, ALARM, information and PTY

interrupts can be set during TA, ALARM or PTY

interrupts.

∗ The factory default setting is “15”.

During a TA, ALARM or PTY interrupt, operate

the VOLUME button 2 upward or downward to

set the volume to the desired level (00 to 33).

∗ When the TA, ALARM, information or PTY inter-

rupt ends, the volume returns to the level it had

before the interrupt.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments