Clarion RMX465D Owner's Manual download pdf (Page 8)

10 RMX465D

7. OPERATIONS

Basic Operations

Note: Be sure to read this chapter referring to the front diagrams of

chapter “3. CONTROLS” on page 5 (unfold).

CAUTION

Be sure to lower the volume before switch-

ing off the unit power or the ignition key. The

unit remembers its last volume setting. If you

switch the power off with the volume up, when

you switch the power back on, the sudden

loud volume may hurt your hearing and dam-

age the unit.

The clock is displayed when the ignition key

is turned to the ACC (accessory) or IGN (igni-

tion-on) position even when the unit power

is off. In some cars, the clock may momen-

tarily disappear when the ignition key is

turned to the START position. The clock will

reappear after the engine has started and the

ignition key is released to the IGN (ignition-

on) position.

Turning on/off the power

Note:

• Be careful about using this unit for a long time with-

out running the engine. If you drain the car’s bat-

tery too far, you may not be able to start the en-

gine and this can reduce the service life of the

battery.

1. Press POWER button 3.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold POWER button 3 for 1 sec-

ond or longer to turn off the power for the unit.

Selecting a mode

1. Press FNC button 3 to change the mode of

operation.

2. Each time you press FNC button 3, the mode

of operation changes in the following order:

Radio mode ➜ MD mode ➜ CD changer

mode ➜ TV mode ➜ Radio mode...

∗ External equipment not connected with C-BUS

is not displayed.

Adjusting the volume

Turning the Rotary volume knob $ clockwise

increases the volume; turning it counterclockwise

decreases the volume.

∗ The volume level is from 0 (minimum) to 33 (maxi-

mum).

Switching the display

Press DISP button 5 to select the desired display.

Each time you press DISP button 5, the display

switches in the following order:

Main display

Clock display

∗ Once selected, the preferred display becomes

the display default. When a function adjustment

such as volume is made, the screen will

momentarily switch to that function’s display,

then revert back to the preferred display sev-

eral seconds after the adjustment.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effects

stored in memory. Select the one you prefer.

∗ The factory default setting is “Z-EHCR OFF”.

Each time you press Z-EHCR button !, the tone

effect changes in the following order:

“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “Z-

ENHANCER 3” ➜ “Z-EHCR OFF” ➜ “Z-

ENHANCER 1”...

• Z-ENHANCER 1 : bass emphasized

• Z-ENHANCER 2 : treble emphasized

• Z-ENHANCER 3: bass and treble emphasized

• Z-EHCR OFF : no sound effect

Adjusting the tone

Press A-M button 2 and select the item to adjust.

Each time you press A-M button 2, the item

changes in the following order:

BASS ➜ TREB ➜ BAL ➜ FAD ➜

Previous mode…

➜

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Comments to this Manuals

No comments

Clarion RMX465D Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for CD players Clarion RMX465D