Clarion CZ109 Owner's Manual download pdf (Page 10)

English

10 CZ109E/CZ109ER/CZ109EG

● Setting the TA standby mode

If you press the [TA] button when only

“TP”

appears in the display,

“TP” and “TA” appear in

the display and the unit is set into the TA

standby mode until a traffic announcement is

broadcast. When a traffic announcement

broadcast starts, “TRA INFO” appears in the

display. If you press the [TA] button while a

traffic announcement broadcast is being

received, the traffic announcement broadcast

reception is cancelled and the unit goes into the

TA standby mode.

● Cancelling the TA standby mode

As

“TP” and “TA” appears in the display, press

the [TA] button. The “TA” in the display goes off

and the TA standby mode is cancelled.

∗ If “TP” is not appeared, pressing the [TA] button

searches for a TP station.

● Searching for a TP station

When

“TP” is not appeared, if you press the [TA]

button, “TA” appears in the display and the unit

automatically receives a TP station.

Auto store function for TP stations

You can automatically store up to 6 TP stations

into preset memory. If the number of TP can be

received less than 6, broadcast stations already

stored in memory and left without being

overwritten.

As “TA” appears in the display, press and hold

the [ ] button (2 sec.). The TP stations with

the good reception sensitivity are stored into

preset memory.

∗ Even if you select FM1 or FM2, a TP station is

stored in memory for FM3.

PTY (Programme Type)

This function enables you to listen to a

broadcast of the selected programme type even

if the unit is on a function mode other than radio.

∗ Some countries do not yet have PTY broadcast.

∗ In the TA standby mode, a TP station has priority

over a PTY broadcast station.

∗ The factory default setting is “OFF”.

1. Press and hold the [DISP] button (1 sec.) to

switch to the RDS adjustment selection

display.

2. Press [x] or [v] to select “PTY”.

3. Turn the [ROTARY] knob to select “ON” or

“OFF”.

•ON:

“PTY” appears in the display and PTY

standby mode is enabled. When the selected

PTY broadcast starts, the PTY item name

appears in the display.

•OFF:

“PTY” turns off in the display and PTY

standby mode is cancelled.

4. Press the [DISP] button to return to the

previous mode.

● Cancelling a PTY interrupt broadcast

Press the [TA] button during the PTY interrupt

broadcast, the PTY interrupt is cancelled and

the unit returns to PTY standby mode.

Selecting PTY

1. Press and hold the [DISP] button (1 sec.) to

switch to the RDS adjustment selection

display.

2. Press [x] or [v] to select “PTY SEL”.

3. Press the [ ] button.

4. Press any of the [DIRECT] buttons.

Alternatively, turn the [ROTARY] knob to

select the desired PTY.

5. Press the [DISP] button to return to the

previous mode.

∗ 6 types of PTY are stored for the [DIRECT]

buttons.

∗ The PTY select mode is cancelled

automatically 7 seconds after a PTY is

selected.

PTY seek

1. Press and hold the [DISP] button (1 sec.) to

switch to the RDS adjustment selection

display.

2. Press [x] or [v] to select “PTY SEL”.

3. Press the [ ] button.

4. Press the [v] button to search for a PTY

broadcast in the direction of higher

frequencies; press the [x] button to search

in the direction of lower frequencies.

∗ If no station with the selected PTY broadcast

can be received, the unit returns to the PTY

select mode.

Downloaded from Caradio-Manual.com Manuals

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments