Ungo ProSecurity
136
RK1: Remote Start/Keyless Entry System
Factory default settings are indicated in
bold
in the following feature tables.
Feature Default LED ON Setting LED OFF Setting
Number (Press "LOCK" Button) (Press "UNLOCK" Button)
Ignition Lock ON
Ignition Lock OFF
Ignition Unlock ON
Ignition Unlock OFF
Active Locking
Passive Locking
Panic with Ignition ON
Panic with Ignition OFF
Door Lock Pulse Duration 0.8 Seconds
Door Lock Pulse Duration 3.5 Seconds
Double Unlock Pulse OFF
Double Unlock Pulse ON
Channel 2 Delayed Validity
Channel 2 Latched (2), Latch Reset with
Ignition (3), 30-Second Timed (4)
10
Factory Alarm Disarm w/Channel 2 ON
Factory Alarm Disarm w/Channel 2 OFF
Security Features ON
Security Features OFF
Code Hopping ON
Code Hopping OFF
Channel 4 Validity
Channel 4 Latched (2), Latch Reset with
Ignition (3), 30-Second Timed (4)
* NOTE: The numbers in parentheses indicate the number of times the LED will flash.
Factory default settings are indicated in
bold
in the following feature tables.
Feature Default LED ON Setting LED OFF Setting
Number (Press "LOCK" Button) (Press "UNLOCK" Button)
Engine Check ON
Engine Check OFF
Tachometer Engine Check
Voltage Engine Check
12 Minute Run Time (1)
24 Minutes (2), 60 Minutes (3) Run Time
Flashing Parking Light Output
Constant Parking Light Output
Cranking Time 0.6 sec. (1)
Crank Time: 0.8 (2), 1.0 (3), 1.2 (4), 1.4 (5)
Voltage Level High Check
1.6 (6), 1.8 (7), 2.0 (8), 4.0 (9) Seconds
7 Activation Pulse: 1 (1)
Activation Pulses: 2 (2)
, 3 (3)
2nd Ignition Output
2nd Accessory Output
Acc. State During Wait to Start OFF
Acc. State During Wait to Start ON
2nd Status Output Normal
Rear Defogger Latched (2), Rear Defogger
Anti-Grind ON
Anti-Grind OFF
* NOTE: The numbers in parentheses indicate the number of times the LED will flash.
Comments to this Manuals