Clarion CLCK Owner's Manual download pdf (Page 7)

English

302

5. OPERATIONS

Basic Operations

Note:

• Refer to the diagrams in “3. CONTROLS”

when reading this chapter.

CAUTION

When the unit is turned on, starting and

stopping the engine with its volume

raised to the maximum level may harm

your hearing.

Be careful about adjusting the volume.

Power on / off

Notes:

• Start the engine before using this unit.

• Be careful about using this unit for a long

time without running the engine. If you

drain the car’s battery too far, you may not

be able to start the engine and this can

reduce the service life of the battery.

1. Start the engine. The power button / knob

illumination on the unit will light up.

Engine ON

position

2. Press the [SRC /

] button on the front

panel or the remote control to turn on the

power under standby mode. The unit goes

back to the last status after power on.

3. Press and hold the [SRC / ] button on

the front panel or the remote control to

turn off the power.

Mute

Press the [MUTE] button on the remote

control to mute the volume from the unit.

Note:

Doing the operation above again or adjusting

volume will release muting.

Volume adjustment

Rotate the [VOLUME] knob on the front

panel or press the [ ] or [ ] button on the

remote control.

The adjustable range of volume is 0 to 40.

CAUTION

While driving, keep the volume level at

which external sounds can still be heard.

Playing source selection

Press [SRC / ] button on the front panel or

remote control repeatedly to choose desired

playing source.

Note:

Playing source selection means selecting

which mode, such as DISC mode, RADIO

mode and AUX mode.

Display system time

Press the [DISP] button on the front panel or

[DISP] button on the remote control to switch

the display information from clock, station

information (radio mode), or track information

(CD mode).

RESET

Note:

* When the [RESET] button is pressed,

preset radio stations, titles, etc. stored in

memory are cleared.

RESET

System Setup

2. Press and hold the [VOLUME] knob to

conrm.

DELETE (BT mode)

1. Rotate the [VOLUME] knob to choose

the paired mobile phone name from the

pairing list.

2. Press and hold the [VOLUME] knob to

conrm.

DISCON (BT mode)

Disconnect currently connected mobile

phone.

1. Rotate the [VOLUME] knob, mobile

phone displays are currently connected.

2. Press and hold the [VOLUME] knob to

disconnect.

MIC SEL (BT mode)

Rotate the [VOLUME] knob to choose

Microphone EXTERNAL or INTERNAL.

MIC GAIN (BT mode)

Rotate the [VOLUME] knob to choose Mic

gain: -5,-4,-3,-2,-1,0,1, 2, 3, 4, 5.

You can change the gain of MIC when a

telephone partner cannot hear your voice.

TONE SEL (BT mode)

You can get mobile phone ring tone from the

speaker.

Rotate the [VOLUME] knob to choose

AUTO or INTERNAL.

• AUTO:

Mobile phone ring tone from the speaker.

• INTERNAL:

The unit original ring tone from the speaker.

AUTO ANS (BT mode)

To answer incoming calls automatically.

Rotate the [VOLUME] knob to choose

AUTO ANS ON or OFF.

AUTO CON: ON/OFF (BT mode)

Automatically connects the mobile phone

was last connected.

Rotate the [VOLUME] knob to choose

AUTO CON ON or OFF.

PIN CODE

Rotate and press the [VOLUME] knob

to choose a 4-digit password. Press the

[VOLUME] knob more than 1 seconds to

conrm.

The PIN CODE default setting is “ 0000 “.

In any mode, press and hold [DISP] button to

enter system setup. Press [

] or [ ]

button to select options, rotate the [VOLUME]

knob to adjust.

CLOCK

Press the [VOLUME] knob to enter clock

setting mode, rotate the [VOLUME] knob to

set clock, press [

] or [ ] button to

select hour or minute, press and hold the

[VOLUME] knob to conrm.

DX/LO (RADIO mode)

Rotate the [VOLUME] knob to choose radio

local or distant at RADIO mode.

• LO: Only stations with strong signal can

be received.

• DX: Stations with strong and weak signals

can be received.

AUX SENS (AUX mode)

Rotate the [VOLUME] knob to choose AUX

Input sensitivity LOW, MID or HIGH at AUX

mode.

PARENTAL PASSWORD (SiriusXM mode)

Change parental password. Original code is

“0000”

LOCK CH (SiriusXM mode)

Lock the current channel

UNLOCK CH (SiriusXM mode)

Unlock current locked channel.

UNLOCK ALL CH (SiriusXM mode)

Unlock all parental locked channels.

ALERT: ON/OFF (SiriusXM mode)

Activate interruption by Artist and Song alert

DELETE ALL ALERT (SiriusXM mode)

Delete saved alert items for artist and song.

SELECT (BT mode)

This ”SELECT” menu is intende d to

automatically paired by selecting a mobile

phone was stored.

This unit can store three mobile phones. The

mobile phone will be stored in paired order

to the unit. The mobile phone can be stored

up to three. The fourth mobile phone can not

be stored. If you want to store a fourth mobile

phone, please delete unwanted mobile phone

from ”DELETE” menu.

1. Rotate the [VOLUME] knob to choose the

pair mobile phone name from the pairing

list.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments

Clarion CLCK Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Car media receivers Clarion CLCK