Clarion XMD3 User Manual download pdf (Page 33)

English

Owner’s manual

English

Owner’s manual

■ Press the [SRC] button to change operation mode when the control panel is open/closed.

■ Each time you press the [SRC] button, the operation mode changes in the following order:

TUNER mode → DVD(CD/MP3) Play mode → USB mode or iPod mode → AUX mode

■ When the 2Zone function is turned on, the [SRC] button will operate only for the MAIN Zone.

To switch to the SUB Zone source. Use the [♪ ] button or [2Zone] button on the remote

control unit.

Mode Selections

■ Cautions

To prevent the battery from becoming completely discharged, operate this unit with the engine

running whenever possible. When the control panel is operating, be careful not to get your

hands or fingers caught in between the control panel and the main unit. Do not move the control

panel by hand.

■ Opening the control panel

① Press and hold the [SRC] button for more than 2 seconds to turn the power on.

②

Press the [TILT] button for more than 2 seconds. The control panel comes out toward you.

Control Panel

■ Adjusting the angle of the control panel

Each press of the [TILT] button tilts the control panel forward or backward.

■ Closing the control panel

Press the [TILT] button more than 2 seconds. The control panel is automatically housed. If

you do not use the unit for a prolonged period oftime or leave the car, please house the control

panel.

※ OPEN or CLOSE function might not work properly if ACC is off while opening or closing the control

panel or if moved by manually.

7. OPERATIONS

DCP Operations

The control panel can be detached to prevent theft. When detaching the control panel, store it in the

DCP (Detachable Control Panel) case to prevent scratches. Please take the DCP with you when

leaving the car.

Remove DCP

① When the control panel is open

Keep pressing the [RELEASE] button on the back of the DCP and pull the front side of the

DCP toward you, and remove it.

Attach DCP

① Hook the left side of the DCP.

② Press the right sides of the DCP with force.

Cautions

■ The DCP can easily be damaged by impact. After removing it, be careful not to drop or give

impact.

■

Remote control unit cannot be used when the DCP is removed.

■ If the DCP is dirty, wipe it off by using a soft dry cloth.

Basic Operations

※ When the unit is turned on, starting and stopping the engine with the volume raised to

maximum level may harm your hearing. Be careful when adjusting the volume. Be careful

whenusing this unit for prolonged periods of time without running the engine. If the car battery

is discharged to excessive levels, you may not be able to start the engine and can reduce the

service life of the battery.

■ Start the engine before using this unit. The illuminations on this unit will light up.

■ Press and hold the [SRC] button for more than 2 seconds to turn the power on. To open the

Control panel, press the [TILT] button more than a second. The last mode screen is displayed.

■ Press and hold the [SRC] button for more than 2 seconds to turn the power off.

POWER ON/OFF

PUSH

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Comments to this Manuals

No comments

Clarion XMD3 User Manual Page 33

Comments to this Manuals

Related products and manuals for Car media receivers Clarion XMD3