Clarion VRX938R Owner's Manual download pdf (Page 40)

44 VRX938R

English

Owner’s manual

4. Press the [ADJ] button again to return to the

STANDARD display.

Anti-theft indicator

The red Anti-theft indicator is a function for pre-

venting theft. When the DCP is removed from the

unit, this indicator blinks.

∗ The factory default setting is “OFF”.

1. When the panel is open, press the [ADJ] but-

ton to display the adjustment selection display.

2. Touch the [BLINK LED] key to select “ON” or

“OFF”.

3. Touch the [ON] or [OFF] key to select a de-

sired mode and set it.

4. Press the [ADJ] button again or touch the

[RTN] key. The unit returns to the previous

mode.

Adjusting the dimmer level

You can adjust the reduced illumination level of

the dimmer. When driving at night with the inside

of the car, the auto dimmer function can reduce

the display illumination linked “to the illumination

power supply of the car” in this unit in order to

prevent glare from the display.

● The factory default:

When the car light is off: Brightest setting

When the car light is on: Medium brightness

1. When the panel is open, press the [ADJ] but-

ton to display the adjustment selection display.

2. Touch the [DIMMER LEVEL] key to adjust the

dimmer level.

3. Touch the [+] or [–] key to adjust.

4. Press the [ADJ] button again or touch the

[RTN] key two times.

The unit returns to the previous mode.

Setting the button illumination

∗ The factory default setting is “RED” (red).

1. When the panel is open, press the [ADJ] but-

ton to select the adjustment mode.

2. Touch the [KEY ILLUMI] key to select “RED”

(red) or “GREEN” (green).

3. Touch the [RED] or [GREEN] key to select a

desired mode and set it.

4. Press the [ADJ] button again or touch the

[RTN] key. The unit returns to the previous

mode.

Setting the beep

∗ The sound heard when you make operations is

called “beep”. The unit can be set up so that it does

not produce this beep sound.

∗ The factory default is “BEEP ON”.

1. When the panel is open, press the [ADJ] but-

ton to select the adjustment mode.

2. Touch the [z] key two times to select “BEEP”.

Touch the [BEEP] key to select “ON” and “OFF”.

3. Touch the [ON] or [OFF] key to select a de-

sired mode and set it.

4. Press the [ADJ] button again or touch the

[RTN] key, The unit returns to the previous

mode.

Setting the sprite pattern speed

∗ The factory default setting is “MID” (mid).

1. When the panel is open, press the [ADJ] but-

ton to select the adjustment mode.

2. Touch the [ANA SENS] key to select “HIGH”

(high) or “MID” (mid) or “LOW” (low).

3. Touch the “HIGH” (high) or “MID” (mid) or

“LOW” (low) key to select a desired mode and

set it.

4. Press the [ADJ] button again or touch the

[RTN] key. The unit returns to the previous

mode.

Other Functions

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 50 51

Comments to this Manuals

No comments

Clarion VRX938R Owner's Manual Page 40

Comments to this Manuals

Related products and manuals for Car video systems Clarion VRX938R