Clarion VRX756VD User Manual download pdf (Page 51)

English

Owner’s manual

280-8207-00

VRX756VD 53

TV Operations

TV functions

When an optional TV tuner is connected through

the CeNET cable, this unit controls all TV tuner

functions. To watch TV requires a TV tuner.

WARNING

For your safety, the driver should not

watch the TV or operate the controls while

driving. Please note that watching and

operating the TV while driving are

prohibited by law in some countries.

Watching TV

Note:

•For your safety, the VRX756VD has a safety

function which turns off the picture when the car

is moving, so only the audio can be heard. The

picture can only be watched when the car is

stopped and the parking break is applied.

1. Press the [SOURCE] button and select the

TV mode.

2. Press the [BAND] button to select the

desired TV band (TV1 or TV2). Each time the

button is pressed, the input selection toggles

between TV1 and TV2.

3. Press the [d] or [a] button to tune in the

desired TV station.

∗ When the panel is open, the same operation

is also available by using the [å] or [∂]

key.

Watching a video

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12V video cassette player (VCP) or video

cassette recorder (VCR) to the TV tuner input

terminal.

1. Touch the screen to display the menu, then

touch the [SUB] key.

2. Touch the [EXTRA SELECT] key in the

menu screen when the “VTR” is displayed.

3. To return to the TV broadcast, touch the

screen again and touch the [EXTRA

SELECT] key in the menu screen.

Seek tuning

1. Press the [BAND] button and select the

desired TV band (TV1 or TV2).

∗ The same operation can be performed by

touching the screen to display the menu

screen, then touching the [BAND] key.

∗ If “MANU” is lit in the display, press and hold

the [BAND] button for 1 second or longer.

“MANU” in the display goes off and seek

tuning is now available.

2. Press the [d] or [a] button to automatically

seek a station. Press the [d] button to

automatically tune up the frequency band to

the next available TV station; press the [a]

button to automatically tune down.

∗ The same operation can be performed by

touching the screen to display the menu

screen, then touching the [å] or [∂] key.

Selecting with a station number

Note:

• Cannot be used when TV tuner TTX7504z is

connected.

1. Touch the screen to display the menu, then

touch the [SRCH] key.

2. Touch the [0]~[9] key corresponding with the

station you desired. When you touch the

wrong number ([0]~[9] key), you can cancel

that to touch the [CLR] key.

3. Touch the [ENT] key. The radio station you

required would be tuned.

4. Touch the [ESC] key.

Manual tuning

There are 2 ways available: Quick tuning and

step tuning. When you are in the step tuning

mode, the frequency changes one step at a

time. In quick tuning mode, you can quickly tune

the desired frequency.

1. Press the [BAND] button and select the

desired band. (TV1 or TV2)

∗ The same operation can be performed by

touching the screen to display the menu

screen, then touching the [BAND] key.

∗ If “MANU” is not lit in the display, press and

hold the [BAND] button for 1 second or longer.

“MANU” appears in the display and manual

tuning is now available.

2. Tune into a station.

● Quick tuning:

Press and hold the [d] or [a] button for 1

second or longer to tune in a station.

+VRX756VD-050-Eng3 05.1.18, 1:03 PM53

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 72 73

Comments to this Manuals

No comments