Clarion DUZ386MP Owner's Manual download pdf (Page 21)

English

21 DUZ386MP

Operations Common to Each Mode

● Setting the clock

2-1. Select “CLOCK”.

3-1. Press the [ ] button.

3-2. Press the [x] or [v] button to select the

hour or the minute.

3-3. Press the [w] or [z] button to set the

correct time.

∗ The clock is displayed in 12-hour format.

3-4. Press the [ ] button to store the time into

memory.

Note:

• You cannot set the clock when it is displayed

with only the ignition on. If you drain or remove

the car’s battery or take out this unit, the clock is

reset. While setting the clock, if another button or

operation is selected, the clock set mode is

canceled.

● Setting the contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “10”.

(Adjustment level: 1 to 16)

2-1. Select “CONTRAST”.

3-1. Press the [w] or [z] button to adjust the

contrast.

● Displaying the settings

The number of indicator of this unit decreases,

you can see the state of current settings at any

operation mode.

2-1. Select “SETTINGS”.

3-1. Press the [w] or [z] button to display the

state of current settings.

∗ When the setting is selected, after 1 second

the current state will be displayed.

Setting the anti-theft function (CATS)

“CATS” is the acronym of “Clarion Anti-Theft

System”.

When you set a PIN code (called as “Personal

Code”), a theft is prevented by disabling the

operation of the unit at the theft.

Setting your Personal Code

2-1. Select “CODE”.

3-1. Press the [ ] button.

The set personal code screen appears.

4-1. Press the [DIRECT] buttons [1]-[6] to enter

your desired 4-digit Personal Code.

5-1. Press and hold the [ ] button for 2

seconds or longer.

The entered Personal Code will be set, and

it will return to the previous screen.

Note:

• Write down your Personal Code in case you

forget it.

Erasing the Personal Code

2-1. Select “CODE”.

3-1. Press the [ ] button.

The ERASE PERSONAL CODE screen

appears.

4-1. Enter the Personal Code currently.

5-1. Press and hold the [ ] button for 2

seconds or longer.

Enter a Personal Code mode is cancelled.

To change adjustment setting

1. Press and hold the [DISP] button for 1

second or longer to switch to the

adjustment selection display.

2. Press the [x] or [v] button to select

the “item name”.

“

CLOCK

”

↔

“

CONTRAST

”

↔

“

SETTINGS

”

↔

“

CODE

”

↔

“

SCRN SVR

”

↔

“

MESSAGE

INPUT

”

↔

“

SCROLL

”

↔

“

DIMMER

”

↔

“

BLINKLED

”

↔

“

TEL-SP

”

↔

“

TEL-SW

”

↔

“

SYSTEM CHECK

”

3. Press the [w] or [z] button to select the

“desired setting value”.

∗ In the case of display blinking “ENT”, you

can press the [ ] button to adjust the

setting value.

∗ After completing settings, press the [DISP]

button to return to the previous mode.

For example:

after 1 second,

DUZ386MP_EN.book Page 21 Thursday, December 6, 2007 3:01 PM

Downloaded from Caradio-Manual.com Manuals

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 36 37

Comments to this Manuals

No comments

Clarion DUZ386MP Owner's Manual Page 21

Comments to this Manuals

Related products and manuals for Car video systems Clarion DUZ386MP