Clarion OHM641 Owner's Manual

6.4” LCDC o l o r M o n i t o rOWNER’S MANUALOHM641

CARE AND MAINTENANCECleaning the cabinet:• Use a soft, dry cloth to gently wipe off any dirt. • Do not use benzene, thinner, car cleaner, etc., as the

Problem:The power was turned off when driving on bumpy roads.Solution:• Severe vibration to the operation panel activated the DCP’s sensor. Press theP

661 W. Redondo Beach Blvd.Gardena, CA 902471-800-GO-CLARIONwww.clarion-usa.comOHM641-10 Rev.3 (03/00)

INTRODUCTIONThe Clarion OHM641 is a full-featured 6.4" LCD Color Monitor. It can beintegrated into a mobile multimedia system. The OHM641 has the

7. Do not let the set become hot. If temperature in the car is high or the set hasbeen exposed to direct sunlight and is hot, lower the temperature be

WIRING PRECAUTIONSRead all wiring precautions. If you are not sure of the connections, contactyour authorized Clarion dealer.1. Disconnect the negativ

4. Place the gasket around the housing and plug the cables into the monitor.Mount the housing to the mounting bracket with the 4 machine screwsprovide

APPLICATIONSWith the VDH9600, TTX001 and the FM100S1. Pick a location to mount the tuner. Typically the tuner will be located closeto the VCP or DVD p

• Turn the modulator and the radio on and tune to the modulated frequency.Turn the FM100S’s switch on. The audio can now be heard over the soundsystem

Stand alone with the TTX001 and the WH1001. Pick a location to mount the tuner. Avoid areas with excessive heat ormoisture and mount the tuner. Plug t

OPTIONAL REMOTE CONTROL BATTERY INSTALLATION• Insert 2 AAA batteries into the compartment located on the back of the unit,observing the proper polarit