Clarion TVX5653 Owner's Manual download pdf (Page 12)

16

English

Owner’s Manual

TVX5653

TV Mode Operations

3) Press either the FM modulator frequency 1

button 9 or the FM modulator frequency 2

button 8.

*The FM modulator frequency is set as follows:

• FM modulator (FRQ1): 88.3 MHz

• FM modulator (FRQ2): 88.7 MHz

Adjusting the brightness and tone

of color

1) Hold down the center of the joystick # for

about 2 seconds.

The screen adjustment mode now appears.

*Start the adjustments while the adjustment dis-

plays are on the screen. These displays will be

automatically cleared after about 5 seconds.

2) Press the joystick # up (w) or down (z) to

select what is to be adjusted, and then press

it to the left (Å) or right (Î) to make the

adjustment.

*The pointer which indicates the adjustment

position moves one scale increment when ini-

tially pushed once. It then moves one scale

increment when it is pushed 5 times.

Note:

• There is no hue adjustment for the PAL TV sys-

tem.

How to connect the unit with a VTR

Notes:

• Before proceeding with the connections, make

absolutely sure that the power of the unit and

VTR (or video camera) has been turned off.

• Before proceeding with the connections, refer

to the Instruction Manual of the unit which is to

be connected.

Note:

• You will need an AV connecting cord (CCA-

357-500) purchased separately to convert the

RCA pin cord into a stereo mini jack in order to

connect an integrated camera/VTR unit to the

unit.

Watching a video tape

Refer to the Instruction Manual of the unit con-

cerned for details on operating the video unit

connected.

1) Press the TV/CD button 2 to select the TV

mode.

2) Press the joystick # up (w) or down (z) to

select VTR.

Each time the joystick # is pressed up (w)

or down (z), the setting is switched in the

sequence shown below.

Note:

• When a VTR has been connected to the sys-

tem expansion terminals on the unit’s rear

panel, the setting is switched in the sequence

shown below.

TV1

VTR

TV2

TV1

VTR1

TV2

VTR2

Brightness adjustment

(BRIGHT)

Hue adjustment (HUE)

Darker Lighter

More

reddish

More

greenish

Color intensity

adjustment (COLOR)

Lighter Darker

Audio output ternimal

Video output ternimal

VTR input

ternimal

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments