Clarion VRX775VD Owner's Manual download pdf (Page 27)

Basic Operations

VRX775VD

English

Owner’s manual

Setting the Auto Panel

When you remove or attach the DCP

(Detachable Control Panel), you can set the

liquid crystal panel automatically housing or

opening.

• The factory default setting is “ON”.

Setting the time of air conditioner

operation mode

This setting can be used to adjust the time the

panel stays in the horizontal position when in the

air conditioner operation mode.

• The factory default setting is 10 seconds.

Adjusting the CLOCK

Note:

• This setting is disabled when the Navigation

system is connected. The clock is automatically

adjusted using the CT (clock time) data in the GPS

data.

1. Press the [ADJ] button, then touch the

[CLOCK] key.

2. Touch the [{] and [}] keys under the Hour,

Minute and a.m./p.m. box to adjust the time,

then touch the [SET] key (The factory default

setting is “1:00 a.m.”).

* The time is displayed in 12-hour format.

3-1. Touch the [C] key to display the next menu

screen.

3-2. Touch the [ON], [OFF] or [CLOSE] key of

the AUTO PANEL item to set to “ON”, “OFF”

or “CLOSE”.

ON:

The liquid crystal panel houses

automatically after removing the DCP.

And the liquid crystal panel opens

automatically after attaching the DCP.

OFF:

Normal operation.

CLOSE:

The liquid crystal panel houses

automatically after removing the DCP.

3-1. Touch the [C] key to display the next menu

screen.

3-2. Touch the [5s], [10s] or [30s] key of the

HVAC MODE item to set the time to “5

seconds”, “10 seconds” or “30 seconds”.

Eng.book Page 29 Wednesday, December 6, 2006 1:51 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 76 77

Comments to this Manuals

No comments

Clarion VRX775VD Owner's Manual Page 27

Comments to this Manuals

Related products and manuals for Car video systems Clarion VRX775VD