Clarion DB455MC Owner's Manual download pdf (Page 22)

Power does not

turn on.

(No sound

is

produced.)

No sound output

when operating

the unit with

amplifiers or

power antenna

attached.

Nothing happens

when buttons are

pressed.

Display is not

accurate.

Fuse

is

blown.

Incorrect wiring.

Power antenna lead is

shorted to ground or

excessive current

is

required

for remote-on the amplifiers

or power antenna.

The microprocessor has

malfunctioned due to noise,

etc.

..

Replace with a fuse of the same amperage. If the

fuse blows again, consult your store of purchase.

Consult your store of purchase.

1.

Turn the unit off.

2.

Remove all wires attached to the power antenna

lead. Check each wire for a possible short to

ground using an ohm meter.

3.

Turn the unit back on.

4.

Reconnect each amplifier remote wire to the

power antenna lead one by one. If the amplifiers

turn off before all wires are attached, use an

external relay to provide remote-on voltage

(excessive current required).

Turn off the power, then

press the

[RELEASE]

~

button and remove the

DCP.

(§

Press the reset button for

Y1l

about 2 seconds with a thin

0./

rod.

:/

Reset button

DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with

are dirty. cleaning alcohol.

No sound heard.

MP3IWMA files are absent

in

a disc.

Files are not recognized as

an

MP3IWMA file.

File system is not correct.

~

....

it

Sound skips or is Disc is dirty.

5.

noisy.

e

Disc

is

heavily scratched or

~

......

warped.

Sound is cut or MP3IWMA files are not

skipped. encoded properly.

Noise is

generated or

noise is mixed

with sound.

22

DB455MC

Write MP3IWMA files onto the disc properly.

Use MP3IWMA files encoded properly.

Use

IS09660 level

1,

2 or JOLIET or

Romeo

file system.

Clean the disc with a soft cloth.

Replace with a disc with no scratches.

Use MP3IWMA files en90ded properly.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments