Clarion CX609A Owner's Manual download pdf (Page 19)

Operations Common to Each Mode

English

20 CX609A

5-1. Press and hold the [ ] button (2 sec.)

The entered Personal Code will be set, and

it will return to the previous screen.

Note:

• Write down your Personal Code in case you

forget it.

• Erasing the Personal Code

2-1. Select “CODE”.

3-1. Press the [ ] button.

The ERASE PERSONAL CODE screen

appears.

4-1. Enter the Personal Code currently.

5-1. Press and hold the [ ] button (2 sec.) or

longer.

Enter a Personal Code mode is cancelled.

• When the ENTER PERSONAL CODE

screen appears

The ENTER PERSONAL CODE screen will be

displayed when turning the ACC power on after

performing the following operations:

• The car battery was replaced.

• The backup power was cut off.

• The [RESET] button was pressed.

Note:

• If you have lost your Personal Code, please

contact Clarion customer service.

1. Enter your Personal Code currently set.

2. When the correct Personal Code is entered,

the unit will restart from the initial startup

screen.

Notes:

• When you enter a wrong Personal Code, the

message “LOCK - - - -” is displayed and the

Personal Code entry is prohibited for a while.

This prohibited time is changed according to the

number of times of wrong code entry as follows:

• 1 to 6 times: 15 seconds

• 7 times or more: 15 minutes

● Turning the screen saver function on

or off

This unit is provided with the screen saver

function which allows you to show various kinds

of patterns and characters in the operation

status indication area of the display in a random

order. You can turn on or off this function. If the

button operation is performed with the screen

saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

∗ The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [w] or [z] button to select the

setting.

Each time you press the [w] or [z] button,

the setting changes in the following order:

“MESSAGE” ↔ “OFF” ↔ “ON”

● Entering message information

Message up to 30 characters long can be stored

in memory and displayed as a type of screen

saver setting.

∗ The factory default setting is “WELCOME TO

CLARION”.

2-1. Select “MESSAGE INPUT”.

3-1. Press the [ ] button.

3-2. Press and hold the [BND] button (1 sec.) to

clear the old message.

3-3. Press the [x] or [v] button to move the

cursor.

3-4. Press the [BND] button to select a

character type. Each time you press the

[BND] button, the character type changes

in the following order:

Capital letters ➜ Numbers ➜ Symbols ➜

Capital letters…

3-5. Press the [w] or [z] button to select the

desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30

characters for message.

3-7. Press and hold the [ ] button (2 sec.) to

store the message in memory.

∗ Press and hold the [BND] button (1 sec.) to

cancel the input message. Then press and

hold the the [ ] button (2 sec.) to store the

message and the message return to default

setting.

CX609A_ENG.book Page 20 Thursday, February 12, 2009 9:36 AM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Comments to this Manuals

No comments