Clarion CX609A Owner's Manual download pdf (Page 8)

Basic Operations

English

9 CX609A

3-1. Each time you press the [w] or [z] button,

the tone effect changes in the following

order:

“CUSTOM” ↔ “EXCITE” ↔ “IMPACT” ↔

“B-BOOST” ↔ “OFF”

CUSTOM : user custom

EXCITE : bass and treble emphasized

mid emphasized

IMPACT : bass and treble emphasized

B-BOOST : bass emphasized

OFF : no sound effect

When “CUSTOM” is set:

3-1. Press the [ ] button.

3-2. Press the [x] or [v] button to select the

“BASS”, “MID” or “TREBLE” mode to

adjust.

3-3. If you want to set the flat, press the [ ]

button to return to the “CUSTOM” mode,

then press and hold the [ ] button

(1 sec.), bass/mid/treble characteristics

become flat and switch to the “CUSTOM”

mode.

When “EXCITE/IMPACT/B-BOOST” is set:

3-1. Press the [ ] button.

3-2. Press the [w] or [z] button to adjust the

setting in the range of

–3 to +3.

∗ The factory default setting is “0”.

3-3. Press the [ ] button to return to the

previous mode.

● Adjusting the BASS/MID/TREBLE

This adjustment can be performed only when

the BEAT EQ is set to “CUSTOM”.

Note:

• While connected with the external amplifers,

please do not set the “BASS/MID/TREBLE” in the

maximum level. Otherwise the speakers may be

damaged.

3-1. Press the [ ] button.

3-2. Press the [x] or [v] button to select as

following order.

“BASS<G>” ↔ “BASS<F>” ↔

“BASS<Q>” ↔ “MID<G>” ↔ “MID<F>” ↔

“MID<Q>” ↔ “TREBLE<G>” ↔

“TREBLE<F>” ↔ “TREBLE<Q>”

∗ The factory default setting is “BASS G”.

3-3. Press the [w] or [z] button to select the

setting.

BASS<G>:The factory default setting is “0”.

(Adjustment range: +7 to –7)

BASS<F>:

The factory default setting is “

”.

(Adjustment range: 50/100/200)

BASS<Q>:The factory default setting is “1”.

(Adjustment range: 0.7/1/1.4/2)

MID<G> : The factory default setting is “0”.

(Adjustment range: +7 to –7)

MID<F> :

The factory default setting is “

500

”.

(Adjustment range: 500/1K/2K)

MID<Q> :

The factory default setting is

“1”

(Adjustment range: 0.7/1/1.4/2)

TREBLE<G>

The factory default setting is

“

”

(Adjustment range: +7 to –7)

TREBLE<F>:

The factory default setting is

“

10K

”.

(Adjustment range: 5K/10K/15K)

TREBLE<Q>

The factory default setting is

“

”

(Adjustment range: 0.7/1/1.4/2)

3-4. Press the [ ] button to return to the

previous mode.

● Setting the MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust

the low frequencies like the normal sound

adjustment function, but emphasizes the deep

bass frequencies to provide you with a dynamic

sound.

∗ The factory default setting is “OFF” (off).

2-1. Select “M-B EX”.

3-1. Press [w] or [z] button to select “ON” or

“OFF”.

● Adjusting the balance

2-1. Select “BALANCE”.

3-1. Press the [w] or [z] button to adjust the

balance of the right and left speakers.

∗ The factory default setting is “CENTER”

(center). (Adjustment range: RIGHT12 to

LEFT12 (right 12 to left 12))

● Adjusting the fader

2-1. Select “FADER”.

3-1. Press the [w] or [z] button to adjust the

balance of the rear and front speakers.

∗ The factory default setting is “CENTER”

(center). (Adjustment range: FRONT12 to

REAR12 (front 12 to rear 12))

● Setting the subwoofer

You can set the low pass filter of subwoofer.

This adjustment can be performed only when

the “REAR/S-W” is set to “S-WOOFER”.

2-1. Select “LPF”.

CX609A_ENG.book Page 9 Thursday, February 12, 2009 9:36 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 30 31

Comments to this Manuals

No comments

Clarion CX609A Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Receiver Clarion CX609A