Clarion CZ102 Owner's Manual download pdf (Page 7)

English

System Setup

SCROLL: ON/OFF

For track information that is longer than the

display panel:

When SCOLL is ON, the LCD will scroll the

ID3 TAG information across the display, e.g.:

TRACK->FOLDER->FILE->ALBUM->TITLE-

>ARTIST->TRACK->...

When SCROLL is OFF, the LCD will display

one of the ID3 TAG information, the default

is TRACK, but user can adjust it to other ID3

TAG information by press [BAND] button.

DIMMER: ON/OFF

Rotate the [VOLUME] knob to choose

DIMMER ON or OFF.

ON: LCD dimmer is active when small light

of vehicle is turned ON.

• OFF: LCD always maximum brightness

regardless of the vehicle small light.

REAR/S-W

Rotate the [VOLUME] knob to choose REAR

or S-WOOFER (SUB-WOOFER).

BEEP: ON/OFF

Rotate the [VOLUME] knob to choose button

beep sound ON or OFF.

12/24H

Rotate the [VOLUME] knob to choose time

format: 12 or 24 hours.

Press the [ ] button to enter sound effect

setting mode. First press shows current EQ.

Rotate the [VOLUME] knob to changes BEAT

EQ in this order:

OFF -> B-BOOST -> IMPACT -> EXCITE ->

CUSTOM

Rotate the [VOLUME] knob to changes

CUSTOM, and press the [VOLUME] knob, the

press [

] or [ ] button to select it

including:

BAS-G -> BAS-F -> BAS-Q -> MID-G ->

MID-F -> MID-Q -> TRE-G -> TRE-F, rotate the

[VOLUME] knob to select a value.

BAS-G / MID-G / TRE-G: (-7)- (+7)

BAS-F: 60 / 80 / 100 / 200

BAS-Q: 1.0 / 1.25 / 1.5 / 2.0

Audio Setup

MID-F: 500 / 1K / 1.5K / 2.5K

MID-Q: 0.5 / 0.75 / 1.00 / 1.25

TRE-F: 10.0K / 12.5K / 15.0K / 17.5K

Press the [ ] button, then press [

]

or [ ] button to select USER preset

including:

BALANCE -> FADER -> M-B EX -> LPF(low

pass lter) -> S-W VOL (Subwoofer Volume),

rotate the [VOLUME] knob to select a value.

BALANCE:LEFT 1-7->CENTER->RIGHT 1-7

FADER:FRONT 1-7->CENTER->REAR 1-7

M-BEX: ON/OFF

LPF: THROUGH/80/120/160

SUBW VOL: (-6)-(+6)

Select tuner as playing source

Press [SRC / ] button once or more to enter

RADIO mode.

Selecting the radio band

Press the [BAND] button on the panel or on the

remote control to select one radio band among

FM1, FM2, FM3 and AM.

Manual tuning

During manual tuning, the frequency will be

changed in steps.

Press the [ ] or [ ] button on the panel to

tune in a higher / lower station.

Press the [ ] or [ ] button on the remote

control to select preset stations.

Auto tuning

Press and hold the [ ] or [ ] button to

seek a higher / lower station.

To stop searching, repeat the operation above

or press other buttons having radio functions.

Note:

When a station is received, searching stops and

the station is played.

Preset scan

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for a desired station in memory.

1. Press the [PS/AS] button.

2. When a desired station is tuned in, press the

[PS/AS] button again to continue receiving

that station.

Note:

Be careful not to press and hold the [PS/AS]

button for 1 second or longer, otherwise the

auto store function will begin and the unit starts

storing stations.

Auto store

Only stations with sufcient signal strength will

be detected and stored in the memory.

Press and hold the [PS/AS] button (1 sec.) to

Radio Operations

start automatic station search.

To stop auto store, press other buttons

having radio functions.

Notes:

1. After auto store, the previous stored

stations will be overwritten.

2. The unit has 4 bands, such as FM1, FM2,

FM3 and AM. FM3 and AM can store

by AS function. Each bands can store 6

stations, CZ102 can store 24 stations in

total.

Manual store

When one expected radio station has been

detected, press and hold number button 1-6

to store it in the memory.

Recall the stored stations

Press one numeric button among 1 to 6 on

the panel to select the corresponding stored

station.

Local seeking

When LOCAL seeking is ON, only those

radio stations with strong radio signal could

be received.

To select LOCAL function, press and hold

the [DISP] button on the front panel, then

press [ ] button repeatedly until LO or DX

displays on the screen, rotate the [VOLUME]

knob to select Local or Distant mode.

Note:

The number of radio stations that can be

received will decrease after the local seeking

mode is ON.

In any mode, press and hold [DISP] button

to enter system setup. Press [

] or [ ]

button to select options, rotate the [VOLUME]

knob to adjust.

CLOCK

Press the [VOLUME] knob to enter clock setting

mode, rotate the [VOLUME] knob to set clock,

press [

] or [ ] button to select hour or

minute, press and hold the [VOLUME] knob to

conrm.

DX/LO (RADIO mode)

Rotate the [VOLUME] knob to choose radio

local or distant at RADIO mode.

• LO: Only stations with strong signal can be

received.

• DX: Stations with strong and weak signals

can be received.

AUX SENS (AUX mode)

Rotate the [VOLUME] knob to choose AUX

Input sensitivity LOW, MID or HIGH at AUX

mode.

SCRN SVR: ON/OFF

Rotate the [VOLUME] knob to choose SCRN

SVR (screen saver) ON or OFF.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Clarion CZ102 Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for CD players Clarion CZ102