Clarion DXZ656MP User Manual download pdf (Page 13)

280-8166-00

DXZ656MP 13

English

Setting the Z-Enhancer Plus

This unit are provided with 4 types of sound

tone effects stored in memory. Select the one

you prefer.

∗ The factory default setting is “Z+ OFF”.

Each time you press the [Z+] button, the tone

effect changes in the following order:

“Z+ OFF” ➜ “Z+ BASS BOOST” ➜ “Z+

IMPACT” ➜ “Z+ EXCITE” ➜ “Z+ CUSTOM” ➜

“Z+ OFF” ...

• Z+ BASS BOOST : bass emphasized

• Z+ IMPACT : bass and treble

emphasized

• Z+ EXCITE : bass and treble

emphasized mid de-

emphasized

• Z+ CUSTOM : user custom

• Z+ OFF : no sound effect

Adjusting the Z-Enhancer Plus

1. Press the [Z+] button and select the Z-

Enhancer Plus mode to adjust.

2. Press the [A-M] button and turning the

[ROTARY] knob clockwise adjusts in the +

direction; turning it counterclockwise adjusts

in the – direction.

● When “BASS BOOST 0” selected, you can

adjust the bass in the range of –3 to 3.

● When “IMPACT 0” selected, you can

adjust the bass and treble in the range of

–3 to 3.

● When “EXCITE 0” selected, you can adjust

the bass and treble in the range of –3 to 3.

∗ When Z-Enhancer Plus is selected, press and

hold the [Z+] button for 1 second or longer to

change to the “CUSTOM” mode.

Bass/treble characteristics become flat and the

“Z+ FLAT” is shown in the display.

Press the [Z+] button again to change to the

“Z+ OFF” mode.

Adjusting the tone

Press the [A-M] button and select the item to

adjust. Each time you press the [A-M] button,

the item changes as following order:

● When “Z+ BASS BOOST” is set

“SUB-WOOF VOL 0” ➜ “BASS BOOST 0"

➜ “BALANCE 0” ➜ “FADER 0” ➜ Last

function mode.

● When “Z+ IMPACT” is set

“SUB-WOOF VOL 0” ➜ “IMPACT 0” ➜

“BALANCE 0” ➜ “FADER 0” ➜ Last

function mode.

● When “Z+ EXCITE” is set

“SUB-WOOF VOL 0” ➜ “EXCITE 0” ➜

“BALANCE 0” ➜ “FADER 0” ➜ Last

function mode.

● When “Z+ CUSTOM” is set

“SUB-WOOF VOL 0” ➜ “ BASS GAIN 0”

➜ “ TREBLE GAIN 0” ➜ “BALANCE 0” ➜

“FADER 0” ➜ Last function mode.

● When “Z+ OFF” is set

“SUB-WOOF VOL 0” ➜ “BALANCE 0” ➜

“FADER 0” ➜ “Last function mode.

∗ “SUB-WOOF VOL” can be adjusted only when

“SUB-WOOFER” is set to “ON”.

Adjusting the subwoofer output

volume

You can adjust the volume output from the unit’s

subwoofer output terminal.

1. Press the [A-M] button and select

“SUB-WOOF VOL 0”.

2. Turning the [ROTARY] knob clockwise

increases the output volume; turning it

counterclockwise decreases the output

volume.

∗ The factory default setting is “0”. (Setting

range: –6 to 6)

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Basic Operations

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

Comments to this Manuals

No comments