Clarion DXZ656MP User Manual download pdf (Page 14)

14 DXZ656MP

280-8166-00

English

Basic Operations

Adjusting the bass

The bass gain, bass FREQ (center frequency)

and bass Q can be adjusted as follows.

1. Press the [A-M] button and select “ BASS

GAIN 0”.

2. Press the [a, d] lever upward or

downward and select from

“ BASS GAIN 0” ➜ “ BASS FREQ 50” ➜

“ BASS Q 1” ➜ “ BASS GAIN 0”…

3. Turn the [ROTARY] knob to adjust the gain,

the FREQ (center frequency) and the Q.

BASS GAIN : –6 to 8 (The factory default

setting is “0”)

BASS FREQ : 50Hz/80Hz/120Hz (The

factory default setting is “50”)

BASS Q : 1/1.25/1.5/2 (The factory

default setting is “1”)

4. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Adjusting the treble

The treble gain and treble FREQ (center

frequency) can be adjusted as follows.

1. Press the [A-M] button and select “

TREBLE GAIN 0”.

2. Press the [a, d] lever upward or

downward and select from

“ TREBLE GAIN 0” ➜ “ TREBLE FREQ

12K” ➜ “ TREBLE GAIN 0”…

3. Turn the [ROTARY] knob to adjust the gain

and the FREQ (center frequency).

TREBLE GAIN : –6 to 6 (The factory default

setting is “0”)

TREBLE FREQ : 8KHz/12KHz (The factory

default setting is “12K”)

4. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Adjusting the balance

1. Press the [A-M] button and select

“BALANCE 0”.

2. Turning the [ROTARY] knob clockwise

emphasizes the sound from the right

speaker; turning it counterclockwise

emphasizes the sound from the left speaker.

∗ The factory default setting is “0”. (Adjustment

range: L13 to R13)

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Adjusting the fader

1. Press the [A-M] button and select “FADER 0”.

2. Turning the [ROTARY] knob clockwise

emphasizes the sound from the front

speakers; turning it counterclockwise

emphasizes the sound from the rear

speakers.

∗ The factory default setting is “0”. (Adjustment

range: F12 to R12)

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust

the low sound area like the normal sound

adjustment function, but emphasizes the deep

bass sound area to provide you with a dynamic

sound.

∗ The factory default setting is off.

1. Press and hold the [A-M] button for 1

second or longer to turn on the MAGNA

BASS EXTEND effect. “M-BASS EX ON”

lights in the display.

2. Press and hold the [A-M] button for 1 second

or longer to turn off the MAGNA BASS

EXTEND effect. “M-BASS EX OFF” lights in

the display.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 28 29

Comments to this Manuals

No comments