Clarion 935VD User Manual download pdf (Page 54)

58 VRX935VD

English

Owner’s manual

5.1ch Surround Decoder Operations

Setting and storing P.EQ Properties

1. Press the [A-M] button to show the AUDIO

MODE menu.

2. Touch the [P.EQ] key to show the P.EQ

adjusting display.

Touch the key for the desirable type to select it.

The P.EQ adjustment contents are as

follows:

● SIGNAL

∗ The factory default setting is “P.NOISE”.

This function selects [P. NOISE] or [MUSIC].

● SPEAKER SELECT

∗ The factory default setting is “FRONT”.

This function selects [FRONT], [CENTER] or

[SURROUND].

● “BAND”

∗ The factory default setting is “BAND1”.

Select the channel to be compensated

(BAND1, BAND2, BAND3).

● “FREQUENCY”

∗ The factory default setting is “1 kHz”.

Select the center frequency that you want to

compensate from the range of 20 Hz to 20

kHz. (1/3 octave step, 31 points)

● “Q”

∗ The factory default setting is “1”.

Set the sharpness of the Q-curve to one of

the parameters: 1, 3, 5, 7 and 20.

● “GAIN”

∗ The factory default setting is “0”.

Adjust the gain (output level) in the range of -

12 dB to +12 dB. (1 dB step, 25 points)

4. After making adjustments to a desired

pattern by repeating the operations of item3,

touch the [RNT] key or press the [A-M]

button to return to the previous mode.

Selecting the Dolby PL

(Dolby Pro

Logic

) type

1. Press the [A-M] button and touch the [Dolby

PLII ] key.

Touch the key for the desirable type to select

it.

3. When the setting is finished, touch the [RTN]

key or press the [A-M] button to return to the

previous mode.

∗ The factory default is “off”.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 68 69

Comments to this Manuals

No comments

Clarion 935VD User Manual Page 54

Comments to this Manuals

Related products and manuals for Car video systems Clarion 935VD