Clarion VRX868RVD Owner's Manual Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 82
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 78
81
VRX868RVD
English
INSTALLATION AND WIRE
CONNECTION MANUAL
Connecting the parking brake lead
Connect the lead to parking brake lamp earth in the metre panel.
Note:
Connecting the parking brake lead to lamp earth allows you to watch TV/VTR/DVD video/video CD when the
parking brake is engaged.
When the parking brake lead is not connected, the monitor will not turn on.
Connecting the Accessories
Connection to the external amplifier
The external amplifier can be connected unless the 5.1 ch Surround Decoder is connected. For
detailed information, refer to the instruction manual of the 5.1 ch Surround Decoder.
Connection to the CCD camera for vehicle
The CCD camera for vehicle can be connected to CCD terminal on the TV tuner. For detailed
information, refer to the instruction sheet or manual for the CCD camera.
Note:
A power supply box (sold separately) is required for connection of the main unit and the CCD camera.
The power supply box for the camera CAA147 cannot be used. Please use the CAA188 instead.
If the specified lead of the mobile phone is connected to the phone mute lead of the main unit,
the audio mute is available when the mobile phone is used.
TV Tuner
When the TV tuner is to be connected, connect the CeNET connector and RCA PIN (yellow). For
detailed information, refer to the instruction manual of the TV tuner.
DVD Changer
To connect the TV tuner and the DVD changer simultaneously, use a commercial video selector
purchasing separately.
Connection to the navigation system (NAX963HD)
When the NAVI (NAX963HD) is being used…
If the 5.1 ch surround decoder (DVH943) is connected, the voice interruptions of the NAVI will not
work.
If the 5.1 ch surround decoder (DVH943N) is connected, the voice interruptions of the NAVI will
work.
Parking brake lamp
+ lead to battery
Parking brake
Parking brake
signal lead
Parking brake lead
(Grass-green)
Electro-tap
Stopper
1. Place the Parking brake lead at the stopper,
and fold it back in the direction of the arrow.
2. Pass the Parking brake signal lead through, and
fold it back in the direction of the arrow.
Parking brake
signal lead
Parking brake lead
(Grass-green)
Parking brake
signal lead
How to attach the electro-tap
VRX868RVD.book Page 81 Thursday, April 27, 2006 3:41 AM
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82

Comments to this Manuals

No comments