Clarion DXZ938R Owner's Manual download pdf (Page 11)

DXZ938R 15

English

Distributing the center channel sound to the

right and left will increase the integrated

sound field image, providing you with an

natural spatial feeling of sound.

Setting to the value 0 will produce the center

sound with the center speaker.

Setting to the value 7 will distribute the cen-

ter sound to the front speaker L/R as the ex-

isting stereo sound does.

AC-Processor

II

Operation

There are 2 modes “STD” (standard) and “PRO”

(professional) in the AC-ProII .

1. Setting the speaker to 4ch+2ch (For details,

refer to the subsection “Speaker Setting” in

the section “Basic Operations”).

2. Turn off the PLII mode.

3. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

4. Press the [a] or [d] button to select the

“AC-PII SEL”.

5. Press the [

] button to select AC-ProII

mode from “STD” or “PRO”.

6. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “STD” or “PRO”.

7. Press the [TITLE] button to the previous

mode.

Operation AC-P

II

STD

1. Press the [VSE] button to enter VSE mode.

2.

Press the [BND] button to select “VSE BASIC”.

3. Press the [DIRECT] button to select VSE

menu as below.

1. Flat: original sound, flat equalizing

2. Bass boost: deep bass sound empha-

sized

3. High boost: middle and high sound area

emphasized

4. Impact: low and high sound area em-

phasized

5. Acoustical: middle sound area empha-

sized (human voice)

6. Smooth: quiet and graceful feeling

4. Press the [VSE] button to return to the previ-

ous mode.

5. Press and hold the [VSE] button for 1 second

or longer so that the VSE effect is turned on

or off.

Adjusting AC-P

II

STD

AC-PII STD makes natural stereo feeling for ev-

ery seat by virtual space enhancer.

VSE, which is room simulation, can correct the

sound pressure inside the car so that the uni-

form sound effect is obtained at any seats.

1. Select “VSE” menu which you want to edit on

the basis of.

2. Press and hold the [TITLE] button for 1 sec-

ond or longer.

3. Press the [a] or [d] button to select item

to be adjusted.

There are “DIFFUSE” “CAR WIDTH” and “CAR

LENG” available for the items to be adjusted.

AC-Processor

II

Operation

DIFFUSE (Adjusts the correction

deviation of broadness)

CAR WIDTH (Adjusts the correction

deviation of width inside

the car)

CAR LENG (Adjusts the correction

deviation of length inside

the car)

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

The adjustment range is from 1 to 10 for

each item.

5. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-

tents.

∗ You can give a title to user memory. For the in-

putting method of titles, refer to the subsection

“Entering titles” in section “Operations com-

mon to each mode”.

Operation AC-P

II

PRO

Arrival time of sound from the speaker can be

selected from among five types according to the

position of the seat. In addition, Time Alignment

Function enables a pinpoint speaker setting to

obtain a uniform sound effect from speakers to

the listner.

1.

Press the [VSE] button to enter POSITION mode.

2.

Press the Band button to select “POS BASIC”.

3. Press the [DIRECT] button to select VSE

menu as below.

1.FRONT-L 2.FRONT-R 3.FRONT 4.REAR

5.FULL SEAT

4. Press the [VSE] button to return to the previ-

ous mode.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 32 33

Comments to this Manuals

No comments