Clarion DXZ938R Owner's Manual download pdf (Page 12)

16 DXZ938R

English

5. Press and hold the [VSE] button for 1 second

or longer so that the POSITION effect is

turned on or off.

Adjusting AC-P

II

PRO

1. Select “VSE” menu which you want to edit on

the basis of.

2. Press and hold the [TITLE] button for 1 sec-

ond or longer.

3. Press the [a] or [d] button to select item

to be adjusted.

∗ There are “TIME ALIGN” and “SP GAIN” avail-

able for the items to be adjusted.

4. Press the [ ].

5. Press the [a] or [d] button to select the

channel to be adjusted. Available channels

are: “FRONT-L”, “FRONT-R”, “REAR-L”,

“REAR-R”, “SW-L” and “SW-R”.

6. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

The adjustment of “TIME ALIGN” range is

from 0 cm to 500cm.

The adjustment of “SP-GAIN” range is from

0db to -20dB for each channel.

7. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-

tents.

∗ You can give a title to user memory. For the in-

putting method of titles, refer to the subsection

“Entering titles” in section “Operations com-

mon to each mode”.

EQ Operation

There are 2 mode for sound EQ “P.EQ” mode

and “BASS/TREB” mode selecting EQUALIZ-

ING mode.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

2. Press the [a] or [d] button to select the

“AC-PII SEL”.

3. Press the [

] button to enter AC-PROII

select mode “STD” or “PRO”.

4. Then press the [a] or [d] button to select

the “EQ SEL”.

5. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “P.EQ” or “BAS/TREB”

mode.

6. Press the [TITLE] button to return to the pre-

vious mode.

∗ Factory default setting is P.EQ

AC-Processor

II

Operation

Operation P.EQ

A full range of frequency level can be minutely

corrected with a smooth curve by frequency cor-

rection in accordance with car models. Six kinds

of P.EQ basic menus have been pre-stored in

this unit according to the car models and the

mounting positions of speakers. Thus, set it in

accordance with the car type.

1. Press the [EQ] button to enter “P.EQ mode”.

2. Press the Band button to select “P.EQ BA-

SIC”.

3. Press the [DIRECT] button to select P.EQ

menu as below.

1.SEDAN-1 2.SEDAN-2 3.WAGON-1

4.WAGON-2 5.MINI VAN-1 6.MINI VAN-2

4. Press the [EQ] button to return to the previ-

ous mode.

5. Press and hold the [EQ] button for 1 second

or longer so that the P.EQ effect is turned on

or off.

Adjusting P.EQ

1. Select “P.EQ” menu which you want to edit

on the basis of.

2. Press and hold the [TITLE] button for 1 sec-

ond or longer.

3. Press the [a] or [d] button to select item

to be adjusted.

There are “FRONT/REAR” ,“BAND” ,“FREQ”

“GAIN” and “Q” available for the items ad-

justed.

4. Press and hold the [DIRECT] buttons for 2

seconds or longer to store the edited con-

tents.

∗ You can give a title to user memory. For the in-

putting method of titles, refer to the subsection

“Entering titles” in section “Operations com-

mon to each mode”.

∗ The parameter created in this section is also

effective when the unit is in both the “STD”

and “PRO” mode.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 32 33

Comments to this Manuals

No comments