Clarion DXZ938R Owner's Manual download pdf (Page 8)

12 DXZ938R

English

6. OPERATIONS

Basic Operations

Note:Be sure to read this chapter referring to the front diagrams of

chapter “2. CONTROLS” on page 5 (unfold).

CAUTION

Be sure to lower the volume before switch-

ing off the unit power or the ignition key. The

unit remembers its last volume setting. If you

switch the power off with the volume up,

when you switch the power back on, the sud-

den loud volume may hurt your hearing and

damage the unit.

Turning on/off the power

Note:

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [FNC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the [FNC] button for 1 second

or longer to turn off the power for the unit.

Note:

• System check

The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power is

turned on, “SYSTEM CHCK” and “PUSH

POWER” appear in the display alternately, so

press the [FNC] button. The system check starts

within the unit. When the system check is com-

plete, the power is turned off, so press the [FNC]

button again.

Selecting a mode

1. Press the [FNC] button to change the opera-

tion mode.

2. Each time you press the [FNC] button, the

operation mode changes in the following or-

der:

Radio mode ➜ DAB mode ➜ CD mode ➜

DVD DECK mode ➜ CD changer mode ➜

MD changer mode ➜ DVD changer mode ➜

TV mode ➜ AUX mode ➜ Radio mode...

∗ External equipment not connected with

CeNET is not displayed.

Adjusting the volume

Turning the [ROTARY] knob clockwise increases

the volume; turning it counterclockwise de-

creases the volume.

∗ The volume level is from 0 (minimum) to 33 (maxi-

mum).

Switching the display

Press the [DISP] button to select the desired display.

Each time you press the [DISP] button, the dis-

play switches:

∗ Once selected, the preferred display becomes the

display default. When a function adjustment such

as volume is made, the screen will momentarily

switch to that function’s display, then revert back to

the preferred display several seconds after the ad-

justment.

∗ When you have entered a title in a CD/MD, it ap-

pears in the main display. If you have not entered a

title, “D NO-TITLE” or “T NO-TITLE” appears in

the title display instead. For information on how to

enter a title, refer to the subsection “Entering titles”

in section “Operations Common to Each Mode ”.

∗ When CT data is not received, “CT––:––” appears

in the display.

Adjusting the balance

1. Press the [A-M] button and select “BAL-

ANCE”.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the right speaker;

turning it counterclockwise emphasizes the

sound from the left speaker.

∗ The factory default setting is “0”. (Adjustment

range: L13 to R13)

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Adjusting the fader

1. Press the [A-M] button and select “FADER”.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the front speakers;

turning it counterclockwise emphasizes the

sound from the rear speakers.

∗ The factory default setting is “0”. (Adjustment

range: F12 to R12)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 32 33

Comments to this Manuals

No comments

Clarion DXZ938R Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for CD players Clarion DXZ938R