Clarion DXZ938R Owner's Manual download pdf (Page 15)

DXZ938R 19

English

1. Press and hold the [TITLE] button for 1 sec-

ond or longer to switch to the adjustment se-

lection display.

2. Press the [a] or [d] button to select “LINK

ACT”.

3. Turn the [ROTARY] knob clockwise for “ON”

or counterclockwise for “OFF”.

● ON:

AF switching between DAB and RDS enabled.

● OFF:

AF switching between DAB and RDS disabled.

4. Press the [TITLE] button to return to the pre-

vious mode.

REG (Regional programme) function

When the REG function is ON, the optimum re-

gional station can be received. When this func-

tion is OFF, if the regional station area switches

as you drive, a regional station for that region is

received.

∗ The factory default setting is “OFF”.

Notes:

• This function is disabled when a national station

such as BBC R2 is being received.

• The REG function ON/OFF setting is valid when

the AF function is ON.

●Switching the REG function ON

Press and hold the [AF] button for 1 second or

longer.

“REG” in the display lights and the REG function

turns on.

●Switching the REG function OFF

Press and hold the [AF] button for 1 second or

longer.

“REG” in the display goes off and the REG func-

tion turns off.

Manually tuning a regional station

in the same network

1. This function is valid when the AF function is

ON and the REG function is OFF.

Note:

• This function can be used when a regional broad-

cast of the same network is received.

2. Press any one of the [DIRECT] buttons to

call out the regional station.

3. If the reception condition of the called out

station is bad, press the [DIRECT] button of

the same number. The unit receives a local

station on the same network.

RDS Operations

TA (Traffic Announcement)

In the TA standby mode, when a traffic announce-

ment broadcast starts, the traffic announcement

broadcast is received as top priority regardless of

the function mode so you can listen to it. Traffic

programme (TP) automatic tuning is also possible.

∗ This function can only be used when “TP” is lit in

the display. When “TP” is lit, this means that the

RDS broadcast station being received has traffic

announcement programmes.

●Setting the TA standby mode

If you press the [TA] button when only “TP” is lit in

the display, “TP” and “TA” light in the display and the

unit is set into the TA standby mode until a traffic an-

nouncement is broadcast. When a traffic announce-

ment broadcast starts, “TRA INFO” appears in the

display. If you press the [TA] button while a traffic an-

nouncement broadcast is being received, the traffic

announcement broadcast reception is cancelled and

the unit goes into the TA standby mode.

● Cancelling the TA standby mode

With “TP” and “TA” lit in the display, press the

[TA] button. The “TA” in the display goes off and

the TA standby mode is cancelled.

∗ If “TP” is not lit, pressing the [TA] button searches

for a TP station.

●Searching for a TP station

When “TP” is not lit, if you press the [TA] button,

“TA” in the display lights and the unit automati-

cally receives a TP station.

Note:

• If a TP station is not received, the unit continues the

search operation. Pressing [TA] button again goes off

“TA” in the display and stops TP station searching.

Auto store function for TP stations

You can automatically store up to 6 TP stations into

preset memory. If the number of TP that can be re-

ceived is less than 6, broadcast stations already

stored in memory are left without being overwritten.

With “TA” lit in the display, press and hold the [P/A]

button for 2 seconds or longer. The TP stations with

the good reception sensitivity are stored into preset

memory.

∗ Even if you select FM1 or FM2, a TP station is stored

into memory for FM3.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 32 33

Comments to this Manuals

No comments

Clarion DXZ938R Owner's Manual Page 15

Comments to this Manuals

Related products and manuals for CD players Clarion DXZ938R