Clarion DXZ945MP Owner's Manual download pdf (Page 12)

12 DXZ845MC

English

7. OPERATIONS

Basic Operations

Note:Be sure to read this chapter referring to the front diagrams of

chapter “3. CONTROLS” on page 5 (unfold).

CAUTION

Be sure to lower the volume before switch-

ing off the unit power or the ignition key. The

unit remembers its last volume setting. If you

switch the power off with the volume up,

when you switch the power back on, the sud-

den loud volume may hurt your hearing and

damage the unit.

Turning on/off the power

Note:

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [FNC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the [FNC] button for 1 second

or longer to turn off the power for the unit.

Note:

• System check

The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power is

turned on, “SYSTEM CHCK” and “Push POWER”

appear in the display alternately, so press the

[FNC] button. The system check starts within the

unit. When the system check is complete, press

the [FNC] button again.

Selecting a mode

1. Press the [FNC] button to change the opera-

tion mode.

2. Each time you press the [FNC] button, the

operation mode changes in the following or-

der:

Radio mode ➜ SIRIUS mode ➜ CD/MP3

mode ➜ M.CATCHER mode ➜ CD changer

mode ➜ DVD changer mode ➜ TV mode ➜

AUX mode ➜ Radio mode...

 External equipment not connected with

CeNET is not displayed.

Adjusting the volume

1. Press the front part of the [ROTARY] knob.

The knob will pop up.

2. Turning the [ROTARY] knob clockwise in-

creases the volume; turning it counterclock-

wise decreases the volume.

 The volume level is from 0 (minimum) to 33

(maximum).

Switching the display

1. Press the [D] button to select the desired dis-

play.

2. Each time you press the [D] button, the dis-

play switches in the following order:

Main display ➜ Clock display ➜

Main display ...

 Once selected, the preferred display becomes

the display default. When a function adjust-

ment such as volume is made, the screen will

momentarily switch to that function’s display,

then revert back to the preferred display sev-

eral seconds after the adjustment.

 When you have entered a title in a CD/MP3/

WMA, it appears in the main display. If you

have not entered a title, “NO TITLE” appears

in the title display instead. For information on

how to enter a title, refer to the subsection

“Entering titles” in section “Operations Com-

mon to Each Mode”.

Setting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust

the low sound area like the normal sound ad-

justment function, but emphasizes the deep

bass sound area to provide you with a dynamic

sound.

 The factory default setting is off.

1. Press and hold the [A-M] button for 1 second

or longer to turn on the MAGNA BASS EX-

TEND effect. “M-B EX” lights in the display.

2. Press and hold the [A-M] button for 1 second

or longer to turn off the MAGNA BASS

EXTEND effect. “M-B EX” goes off from the

display.

Note:

• When “ADF-1”, “ADF-2” or “ADF-3” is selected for

ADF (Anti Distortion Filter), setting of MAGNA

BASS EX cannot be performed.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Comments to this Manuals

No comments

Clarion DXZ945MP Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for CD players Clarion DXZ945MP