Clarion CZ102 Owner's Manual download pdf (Page 9)

English

Other various play functions

Scan play

This function allows you to locate and play the

rst 10 seconds of all the tracks recorded on a

disc.

Press the [ 1 ] button to perform scan play.

Repeat play

This function allows you to play the current

track repeatedly or play a track currently being

played in the MP3/WMA folder repeatedly.

CD:

1. Press the [ 2 ] button once or more until “RPT

ON” appears on the LCD to perform repeat

play.

2. Press [ 2 ] button repeatedly until “RPT

OFF” appears on the LCD to cancel repeat

playback.

CD/MP3/WMA Operations

Press [SRC / ] button on the panel or remote

control to select “AUX”.

AUX is just for audio content with 3.5mm Jack

connector plugged into audio-in socket on the

front panel.

AUX Input sensitivity setting

1. Press and hold the [DISP] button (1 sec.).

2. Turn the [VOLUME] knob to select “AUX

SENS”.

3. If the output level of connected external

audio player is “HIGH”, rotate [VOLUME]

knob and choose “LOW”. And if the output

level is “LOW”, choose “HIGH”.

AUX Operations

MP3/WMA:

1. Press the [ 2 ] button once or more until

“TRACK RPT” appears on the display to

perform repeat play, and “RPT” segment

lights on.

2. For MP3/WMA files, press [ 2 ] button

repeatedly until “FOLDER RPT” appears

on the display for folder repeat play.

3. Press [ 2 ] button repeatedly until “RPT

OFF” appears on the display to cancel

repeat playback, and “RPT” segment goes

o.

Random play

This function allows you to play all tracks

recorded on a disc in a random order.

Press the [ 3 ] button to perform random

play.

6. TROUBLE SHOOTING

GENERAL

Problem Cause Measure

Unit can not

power on.

Unit fuse blown. Replace with new fuse of correct rating.

Car battery fuse blown. Replace with new fuse of correct rating.

Unit can not

power on.

Nothing happens

when buttons are

pressed.

Display is not

accurate.

The microprocessor has

malfunctioned due to noise, etc.

Turn o the power and remove the DCP.

Press the [RESET] button with a thin rod.

Note:

When the [RESET] button is pressed, turn o

the ACC power.*

* When the [RESET] button is pressed,

frequencies of radio stations, titles, etc. stored

in memory are cleared.

Remote control

does not work.

Battery depleted. Change the battery.

Battery installed incorrectly. Install the battery correctly.

No/low audio

output.

Improper audio output connection. Check wiring and correct.

Volume set too low. Increase volume level.

Speakers damaged. Replace speakers.

Heavily biased volume balance. Adjust the channel balance to center position.

Speaker wiring is in contact with

metal part of car.

Insulate all speaker wiring connections.

Poor sound quality

or distortion.

Non-standard disc used. Use a standard disc.

Speaker power rating does not

match unit.

Replace speakers.

Wrong connections. Check wiring and correct.

Speaker is shorted. Check wiring and correct.

Tel-Mute

malfunction.

MUTE wire is grounded. Check the MUTE wiring and correct.

Unit resets itself

when engine is o.

Incorrect connection between

ACC and Battery.

Check wiring and correct.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Clarion CZ102 Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for CD players Clarion CZ102