Clarion DXZ938R Owner's Manual download pdf (Page 10)

14 DXZ938R

English

AC-Processor

Operation

Dolby Pro Logic

Dolby Pro Logic II is a matrix decoding technol-

ogy in which the updated digital matrix technol-

ogy is applied and Dolby Pro Logic is further im-

proved. It realizes excellent 5.1 channel repro-

duction of Dolby surround source as well as ste-

reo sound sources such as CDs, thereby caus-

ing a surround channel to be full-ranged (20 Hz

to 20 kHz) and become stereo. Therefore, you

can enjoy any stereo sources with dynamic

sound of 5.1 channel. According to a source to

be reproduced, Music Mode or Matrix Mode can

be selected.

∗ Manufactured under license from Dolby Laborato-

ries. “Dolby”, “Pro Logic” and the double-D sym-

bol are trademarks of Dolby Laboratories.

● Music Mode

This mode is suitable for stereo sources like

CDs. By optimizing frequency characteristics of

the surround channel, a broader and deeper

sound is assured. In addition, since broadness

of the sound field varies with recording condi-

tions of music sources, there is Adjusting Mode

which makes a finer tuning available.

● Matrix Mode

This mode is suitable for AM/FM radio.

Selection and switching of the

Dolby Pro Logic

effect

While the “Dolby PLII ” indication is lit in the dis-

play, the “Dolby PLII ” effect is set to “On”.

Setting the speaker 5.1ch ( For detail, see the

section Basic Operation - Speaker setting).

2. Press the [PLII ] button so that PLII mode is

turned on. Each time the button is pressed,

the mode changes as follows: “MUSIC

MODE” ➜ ”MATRIX MODE” ➜ ”PLII OFF

MODE” ➜ ”MUSIC MODE”

3. Select the “PLII OFF MODE” to turn off the

Dolby Pro Logic II effect. Also press the

[VSE] button or [EQ] button to turn off the

Dolby Pro II.

Adjusting Dolby Pro Logic

Operation

1. Select Dolby Pro Logic II mode and press

and hold the [TITLE] button for 1 second or

longer to enter “ADJ” mode.

2. Press the [a] or [d] button to select the

“PLII DELAY”.

3. Press the [

] button to adjust the “PLII

DELAY”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

∗ The adjustment range of surround speaker de-

lay is from 0m sec. to 15m sec.

∗ The adjustment made in “PLII DELAY” is re-

flected in the each mode.

Adjusting Music Mode

Use the MUSIC MODE to make more detailed

adjustments.

1. Select “Music Mode” and press and hold the

[TITLE] button for 1 second or longer.

2. Press the [a] or [d] button to select the

“PLII CONT”.

3. Press the [

] button to adjust the “PLII

CONT” detail items.

4. Press the [a] or [d] button to select the

items.

5. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

∗ The detailed adjustments depend on each of

the adjustment items. There are 3 items:

“PANORAMA”, “DIMENSION”, and “CTR

WIDTH”.

PANORAMA (Y or N):

Selecting PANORAMA mode will extend the

front sound field image to the rear. If sur-

round effect does not seem to be presented

sufficiently, select the setting position “Y”.

DIMENSION (0 to 6):

Selecting DIMENSION mode will shift the

sound field image to the front or the rear. If

the balance of the sound field image is too

much pulled towards the front or rear, the

balance front/rear can be corrected The ad-

justing value 3 is the center position. The

range of 3 to 0 shifts the balance front/rear to

the front. The range of 3 to 6 shifts the bal-

ance front/rear to the rear.

CTR WIDTH (0 to 7):

Selecting CTR WIDTH mode will adjust the

localization of the center channel between

the center speaker and the front speaker L/R.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 32 33

Comments to this Manuals

No comments

Clarion DXZ938R Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for CD players Clarion DXZ938R