Clarion DXZ938R Owner's Manual download pdf (Page 9)

DXZ938R 13

English

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Operation BASS/TREB

1. Press the “BASS/TREB” mode. Each time

the [EQ] button is pressed, the adjusting item

“BASS” or “TREB” is changed cyclically.

2. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust “BAS/TREB”.

3. Press the [EQ] button to return to the previ-

ous mode.

∗ The Adjustment range is from -6dB to +6dB

for bass and treb.

∗ This parameter is reflected STD PRO mode

Speaker Setting

You can set up your favorite sound environment

using “Dolby Surround Pro logic II” or “AC-

Processor II” so that you can enjoy a dynamic

sound of 5.1 ch surround or 4ch + 2ch speaker.

●Dolby Pro Logic II 5.1ch surround

Center SP +Front L.R. +Surround L.R. +Sub

Woofer.

To make the most of the sound field reproduc-

tion of Dolby Pro Logic II , a speaker system of

5.1 channel is recommendable. It has been also

designed so that a sound filed effect almost as

good as that of 5.1 channel reproduction can be

obtained even by a constitution of 4 channel + 1

channel (subwoofer).

If you using Dolby Pro Logic source and your

speaker is only four Front L.R. + Surround L.R.,

speaker setting will be better to CTR+SW and

CTR OFF, so Center channel divided to Front

L.R. automatically.

Note

• When SW-L + SW-R are chosen, audio output

from SW-L is not available in the PL

mode.

●AC- Processor II

Front L.R. + Rear L.R.+ Sub Woofer L.R. (4ch +

2ch)

To make the most of the sound field reproduc-

tion of AC-Processor II , a speaker system of 4

channel + 2 channel is recommendable.

1. Press and hold the [TITLE] button for 1 sec-

ond or longer and enter “ADJ” mode.

2. Press the [a] or [d] button to select the

“SP-SETTING”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “SW L+SW R” or “CTR

+SW” mode.

Basic Operations

Note:

• When CTR + SW are chosen, audio output from

CTR is not available except in the PL

mode.

Center Speaker and Sub Woofer On / Off

Select PLII Mode on and SP setting to

“CTR+SW” mode

1. Press and hold the [TITLE] button for 1 sec-

ond or longer.

2. Press the [a] or [d] button to select the

“SP SEL”.

3. Press the [

] button to adjust the “CTR-

SP” “SUB W”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “ON” or “OFF”.

∗ This function is useful for Speaker Setting

Problems.

Filter Adjustment

1. Select Dolby Pro Logic II or AC-ProII mode

and press and hold the [TITLE] button for 1

second or longer.

2. Press the [a] or [d] button to select the

“FILTER”.

3. Press the [

] button to adjust the “SUB-W

LPF” or “HPF”.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust filter frequency.

∗ Sub Woofer Low Pass Filter Adjustment

Range is 50, 80, 120Hz (18dB/oct), OFF.

∗ When PLII mode Sub Woofer Low pass Filter

Adjustment Range is 50, 80, 120Hz (12dB/

oct.), OFF.

∗ High Pass Filter adjustment Range is 50, 80,

120Hz(12dB/oct), thrgh.

Note:

• High pass filter adjustment is available for Front

2ch and Rear 2ch only AC-Pro

PRO Mode.

CT (Clock Time) function

The CT function receives CT data sent from an

RDS station and displays the time. Press the

[DISP] button to switch to the CT display.

∗ If a CT data is not being received, “CT––:––” ap-

pears in the display.

Note:

• CT data is not transmitted in some countries and

by some broadcast stations. Also, in some areas,

the CT may not display accurately.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 32 33

Comments to this Manuals

No comments

Clarion DXZ938R Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for CD players Clarion DXZ938R